A Brief Rundown of

How to Find Hidden Piping and Valves

If you are a homeowner then you need to know the details of your home like the back of your hand. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. Below are some of the ways that you can be able to find out where the various valves are located.

If your home has natural gas then the shutoff valves will probably be located just before the gas meter outside the home. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. A second valve is usually located further down the line or where the gas pipe first enters.

Modern homes usually have gas pipes that are made from a flexible copper pipe and the pipe runs from outside the house into your utility room. Having such a piping usually means that you have a high-pressure gas system for your home. The shutoff valves of such systems are usually located near the water heater or the furnace.

For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. Cold environments usually have the shut off points located in the house so that they do not freeze. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.

If you are finding it hard to find the valves then consider looking at property reports that you got at the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. With the report, you are able to see the picture of the valves so that you are able to know how they look like so that you can shut them off.

If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. Since such valves usually have metals then you can easily find them by using a metal detector. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.